Research

Space instrumentation

Most of our science starts with an instrument we designed and built in the lab, from radio receivers in the Canadian backcountry to X-ray cameras in low Earth orbit.

We design instruments around the measurement a science question needs, then build them to survive launch and work for years in orbit, or for months in the field, on a small budget. Students do most of the design, fabrication, and testing, with our research staff. Each generation builds on the last: the VLF receivers that flew on VPM led to CANVAS, and the X-ray imager on AEPEX has two descendants under construction.

InstrumentMeasuresPlatformStatus
AVID receiversVLF transmitter and lightning signals, amplitude and phaseGround array, western CanadaOperating
Electric field mills and LF sensorsThunderstorm electric fields; lightning radio emission, 3–300 kHzGround arrays, Colorado and ArgentinaCampaigns completed
μBBRVLF waves, 1 magnetic and 1 electric component, 1–30 kHzVPM CubeSatMission completed
CANVAS VLF receiverVLF waves, 3 magnetic and 2 electric components, 0.3–40 kHzCANVAS CubeSatIn orbit
VRuMEarth's magnetic field, vector and scalarCOSMO CubeSatIn orbit
AXISBremsstrahlung X-rays, 50–250 keV, imagedAEPEX CubeSatIn orbit
I-AXISX-ray images of microbursts every 50 msIMPAX CubeSatLaunch 2027
RADICALS X-ray ImagerX-ray images from a spinning spacecraftRADICALSLaunch 2028
XNAV imagerX-rays from pulsars, for navigationDeep space (concept)In development

Radio receivers on the ground

Our oldest line of instruments listens to radio waves from lightning and navy transmitters. The newest is the receiver designed for AVID, the Array for VLF Imaging of the D-region (Cannon et al., 2025). It is a modern, low-cost VLF receiver, built and deployed by a team of graduate and undergraduate students. Eleven of them now operate across western Canada. For thunderstorm research we built an array of low-cost, high-speed, autonomous electric field mills (Antunes de Sá et al., 2020) and upgraded low-frequency magnetic field sensors, and deployed both in Argentina for the RELAMPAGO field campaign.

Wave receivers in orbit

The CANVAS three-axis search coil assembly
The CANVAS search coils, built by LPC2E in Orléans. Everything else in the receiver was designed at CU Boulder.
The CANVAS payload digital board
The CANVAS payload digital board, where an FPGA turns 113 GB of raw data per day into 212 MB of spectra.

The micro-broadband receiver (μBBR) on VPM was designed first at Stanford and then at CU Boulder. It recorded one magnetic and one electric channel, time-tagged to 100 ns by GPS, and processed the signals on an FPGA in real time (Marshall et al., 2021). The CANVAS receiver fits five channels into a 4U CubeSat: three search coils on a 1 m carbon fiber boom and two pairs of deployable electric field antennas (Reid et al., 2021). It runs continuously, computing full power and cross spectra every second, which gives each wave's direction, polarization, and Poynting flux.

X-ray imagers

Cutaway of the AXIS X-ray imager
AXIS on AEPEX: graded-Z shielding, a coded-aperture mask, and twelve CZT detectors.
The I-AXIS X-ray imager for IMPAX
I-AXIS for IMPAX: the same idea, 200 times faster.
The RADICALS X-ray imager
The RADICALS X-ray imager, one of two on the spinning spacecraft.

To image energetic particle precipitation from above, we image the X-rays it makes (see Radiation in space). X-rays cannot be focused by lenses, so our imagers use coded apertures: a tungsten mask of many pinholes that casts a patterned shadow onto pixelated cadmium zinc telluride (CZT) detectors. A graded-Z housing of polyethylene, tungsten, and tin shields the detectors from background.

I-AXIS and the RADICALS imager use front-end ASICs from IDEAS. Riley Reid extended the coded-aperture approach to energetic electrons, using compact Timepix detectors to measure pitch angle distributions at high angular resolution (Reid et al., 2024; Reid and Marshall, 2025).

Magnetometers

The Vector Rubidium Magnetometer (VRuM) on COSMO pairs an optical rubidium scalar magnetometer from FieldLine Industries with coils that vectorize it and two star trackers on a shared Zerodur optical bench. It was developed with Svenja Knappe's group in CU Mechanical Engineering (Chism et al., 2025). More on the science is on our Magnetic fields page.

The VRuM magnetometer payload
The VRuM payload: magnetometer cube, two star trackers, and electronics.
The Braunbek coil cube that applies VRuM's modulation fields
The Braunbek coil cube that applies the small modulation fields used to vectorize the sensor.

Testing

Every instrument is calibrated in the lab and tested after integration with its spacecraft: vibration, thermal vacuum, and end-to-end functional tests. COSMO's magnetometer was calibrated at NASA Goddard's Magnetic Test Facility, the AXIS detectors with radioactive sources such as cobalt-57, and the CANVAS receiver with injected signals across its full frequency range. The spacecraft side of this work is on our Small satellites page.