Missions

CANVAS

Climatology of Anthropogenic and Natural VLF wave Activity in Space

A student-built 4U CubeSat that measures VLF radio waves from lightning and ground transmitters after they pass through the ionosphere. Launched April 7, 2026.

Why VLF from space

Lightning strikes about 50 times per second around the world, and most of its electromagnetic pulse is at very low frequencies (VLF). Together with powerful navy VLF transmitters, lightning injects whistler-mode waves into space. On the way up, these waves are absorbed in the D-region and dispersed in the F-region. They are then refracted through the plasmasphere, where they can scatter radiation belt electrons into the atmosphere, causing lightning-induced electron precipitation.

The D-region has very low electron density but a high collision rate, so it absorbs radio waves, and solar flares, solar energetic particle events, and energetic electron precipitation can wipe out radio signals entirely. How much VLF energy gets through, and how that changes with location and time, is still poorly known.

Rendering of the CANVAS CubeSat with its search coil boom and electric field antennas deployed
CANVAS in its deployed configuration: the search coils sit at the end of a 1 m carbon fiber boom, away from the spacecraft's magnetic noise, with the four electric field antennas extended.

Science questions

  • What is the electromagnetic energy input into the space environment by lightning?
  • What is the frequency spectrum of VLF wave energy above the ionosphere, from 0.3 to 40 kHz?
  • What is the transmission transfer function of the ionosphere for VLF energy, and how does it vary in space and time?

A survey instrument built for a small satellite

CANVAS follows the French DEMETER mission (2004–2010), which recorded single-component power spectra in survey mode and full waveforms only in short bursts. CANVAS instead runs a single "fast survey" mode all the time. It records three magnetic and two electric field components from 0 to 40 kHz in 57 frequency bins plus 10 bins at VLF transmitter frequencies. It produces full power spectra and cross spectra every second, which is enough to work out the wave vector, Poynting flux, and polarization (Santolík et al., 2003). It does this from a 4U, 4.5 kg spacecraft built on a $1.4M budget.

The three-axis search coil assembly
The three-axis search coils, developed by LPC2E in Orléans, France.
3D-printed PEEK search coil holder
The 3D-printed PEEK holder that fixes the three coils at right angles.
The CANVAS payload digital board
The payload digital board, where the FPGA processes all five channels.

Except for the search coils, everything was designed at CU Boulder: the preamplifiers, the analog and digital boards, the deployable antennas and their hinges, and the boom mount. The receiver collects 113 GB of raw data per day. An onboard FPGA reduces that to 212 MB per day. It rotates the magnetic field into spacecraft coordinates, windows and Fourier-transforms the data, and computes power and cross spectra. It then averages them over one second, rebins them to 67 frequency bins, and compresses the result before handing it to the flight computer.

Spectrogram from a bench test of the CANVAS receiver
Spectrogram from a bench test of the receiver's anti-aliasing filter chain.

Built by students

Engraved plaque with the names of CANVAS team members
The plaque flying on CANVAS carries the names of the students who built it.

More than 50 students have worked on CANVAS over four to five years of development, most of them through the Graduate Projects course. Students built the spacecraft structure, flight computer, power system, and interface electronics. Off-the-shelf components include the Blue Canyon XACT attitude control system, UHF and S-band radios, and a GPS receiver. CANVAS shares its bus design with COSMO.

New technology on the mission includes the carbon fiber boom, 3D-printed structural parts, a compact VLF receiver, deployable antenna hinges, and new low-noise preamplifiers.

Cutaway rendering of the CANVAS spacecraft
Inside the 4U spacecraft: avionics stack, payload boards, radios, and the stowed boom.
Team member working on CANVAS in a clean bench before delivery
Final work on the flight spacecraft before delivery.

Launch and status

Integration was completed in mid-2025 and environmental testing in late 2025. CANVAS launched on 7 April 2026 on the STP-29A mission, a Minotaur IV from Vandenberg Space Force Base. Spacecraft commissioning is complete, and instrument commissioning is under way.

CANVAS ground track on a world map
CANVAS ground track from the operations dashboard.

What comes next

To turn CANVAS spectra into a measure of how much the ionosphere absorbs, we model trans-ionospheric propagation with the full-wave method of Lehtinen and Inan (2009), using updated attenuation profiles from Wold et al. (2026, in preparation). We repeat the model at every frequency from 0.3 to 40 kHz and compare it with the spectra measured in orbit, adjusting the model ionosphere until it fits. This also requires knowing the source spectrum, which is why we pair CANVAS with our ground-based VLF receiver array, AVID.

Modeled VLF wave energy at 700 km altitude from a ground transmitter
Modeled energy at 700 km altitude at 4.32 kHz, comparing the full-wave method with a simpler illumination model.
References and talks
  1. Marshall, R. A., D. M. Malaspina, T. Dudok de Wit, G. Jannet, and S. Wankmueller (2026), The Climatology of Anthropogenic and Natural VLF wave Activity in Space (CANVAS) CubeSat mission, URSI General Assembly, Krakow, Poland.
  2. Marshall, R. A., R. A. Reid, J. M. Cannon, S. Wankmueller, P. Vankawala, S. Palo, D. M. Malaspina, T. Dudok de Wit, and G. Jannet (2022), The CANVAS mission: Quantifying the very-low-frequency radio energy input from the ground into the Earth's magnetosphere, 36th Annual AIAA/USU Conference on Small Satellites, SSC22-WKVIII-06.
  3. Reid, R. A., R. A. Marshall, S. E. Palo, and D. M. Malaspina (2021), A compact five-channel VLF wave receiver for CubeSat missions, 35th Annual AIAA/USU Conference on Small Satellites, SSC21-VI-09.
  4. Graf, K., U. S. Inan, D. Piddyachiy, P. Kulkarni, M. Parrot, and J. Sauvaud (2009), DEMETER observations of transmitter-induced precipitation of inner radiation belt electrons, JGR Space Physics, 114(A7).
  5. Lehtinen, N. G., and U. S. Inan (2009), Full-wave modeling of transionospheric propagation of VLF waves, GRL, 36(3).
  6. Santolík, O., M. Parrot, and F. Lefeuvre (2003), Singular value decomposition methods for wave propagation analysis, Radio Science, 38(1).
  7. Xu, W., R. A. Marshall, J. Bortnik, and J. W. Bonnell (2021), An electron density model of the D- and E-region ionosphere for transionospheric VLF propagation, JGR Space Physics, 126. doi

CANVAS is supported by the U.S. National Science Foundation.