Seeing precipitation from above
Precipitation into the atmosphere is one of the main ways the radiation belts lose electrons, and it deposits energy that changes the chemistry of the upper atmosphere. Key questions are still open. How much energy goes in, and how does it depend on storms, substorms, season, latitude, and local time? How large are the regions where electrons rain down, and what does that imply for the total flux leaving the belts?
When precipitating electrons hit the atmosphere they produce bremsstrahlung X-rays, and many of those X-rays scatter back toward space. Imaging them from orbit shows the precipitation's flux, energy spectrum, size, and evolution over a wide area at once. Particle detectors can't do that, because they only sample the electrons passing through the spacecraft.

AEPEX was first envisioned in 2015 as a ride-along on a larger mission to study precipitation and its atmospheric effects. It became its own CubeSat proposal in 2016 and was funded on the third try, after we added a particle detector.
Instruments

AXIS, the Atmospheric X-ray Imaging Spectrometer
AXIS measures X-ray flux, energy spectrum, and spatial extent, from which we infer the precipitating electrons. It is an array of 12 cadmium zinc telluride (CZT) detectors, each a 16 × 16 pixel array sensitive to 50–250 keV photons. It builds on the University of Calgary's EPEx instrument, flown on a balloon in 2018. A tungsten coded-aperture mask casts patterned shadows onto the detectors. A graded-Z housing of polyethylene, tungsten, and tin shields against background, and a pinhole sector provides a context image that helps constrain the image reconstruction.


Coded-aperture imaging
X-rays can't be focused with lenses. A single pinhole works but gathers very little light. A coded aperture is an array of pinholes that improves the signal-to-noise ratio more than tenfold, at the cost of having to decode the overlapping images afterward. AEPEX uses a Modified Uniformly Redundant Array (MURA) mask in a "no two holes touching" variant that can be manufactured. Decoding is straightforward for point sources; producing accurate images of spread-out sources like precipitation is the challenge.

AFIRE

AFIRE measures the precipitating electron energy spectrum directly, from 200 keV to 1 MeV in 16 energy bins at 1 Hz. It uses both an omnidirectional surface detector and a collimated detector that looks into the loss cone. It is a build-to-print copy of the successful FIRE instrument on the FIREBIRD I and II CubeSats (Breneman et al., 2017) and fits in half a CubeSat unit.
Spacecraft
CU Boulder and LASP built the flight computer, flight software, power system, solar panels (with 30%-efficient AzurSpace cells), and the structure, which integrates the instrument shielding. Thermal control is passive, with resistive heaters. The spacecraft also carries a Space Inventor battery, a Blue Canyon XACT-15 attitude control system, a Clyde Space S-band transmitter, and a SpaceQuest UHF transceiver, with LASP S-band and UHF ground stations.
Development and testing
We run environmental testing (vibration and thermal vacuum) after the instrument is integrated with the spacecraft. After thermal vacuum, the AXIS detectors showed damage. A mismatch in thermal expansion between the detector crystals and their boards had cracked some crystals and lost some pixels. Fewer good pixels lowers the signal-to-noise ratio for those parts of the image, but simulations show the image reconstruction still works, and adding the pinhole image improves it further.


AEPEX finished integration and testing in early 2025, then spent six months in storage. It came out in early 2026 for final testing, including a last-minute fix to the solar array release.

Launch and status

AEPEX launched successfully on SpaceX's Transporter-16 on 30 March 2026, alongside COSMO. It rode Exotrail's Spacevan-2 orbital transfer vehicle and was deployed on 12 May 2026 into a 510 km sun-synchronous orbit with a 03:00 local time of ascending node. Commissioning is underway, with operations run from LASP.

Earlier development
The original AXIS design work compared a slit-aperture push-broom imager with the coded-aperture design that flew.


References and talks
- Marshall, R. A., W. Xu, T. Woods, C. Cully, A. Jaynes, C. Randall, D. Baker, M. McCarthy, H. E. Spence, G. Berland, A. Wold, and E. Davis (2020), The AEPEX mission: Imaging energetic particle precipitation in the atmosphere through its bremsstrahlung X-ray signatures, Advances in Space Research, 66(1), 66–82. doi
- Berland, G. D., et al. (2023), The Atmospheric X-ray Imaging Spectrometer (AXIS) instrument: Quantifying energetic particle precipitation through bremsstrahlung X-ray imaging, Review of Scientific Instruments, 94, 023103. doi
- Marshall, R. A., et al. (2023), The AEPEX mission: Imaging energetic particle precipitation into Earth's upper atmosphere, 37th Annual AIAA/USU Conference on Small Satellites, SSC23-WIV-01.
- Berland, G. D., et al. (2021), The AEPEX CubeSat mission: Quantifying energetic particle precipitation through bremsstrahlung X-ray imaging, 35th Annual AIAA/USU Conference on Small Satellites, SSC21-XIII-01.
- Berland, G. (2024), Quantifying radiation belt electron precipitation through bremsstrahlung X-ray spectral imaging, Ph.D. dissertation, University of Colorado Boulder.
- Spies, W., R. A. Marshall, M. McCarthy, and C. Cully (2025), The AEPEX mission: Can coded aperture optics reveal particle precipitation structures?, AGU Fall Meeting, New Orleans.
- Xu, W., and R. A. Marshall (2019), Characteristics of energetic electron precipitation estimated from simulated bremsstrahlung X-ray distributions, JGR Space Physics, 124. doi